The SenseNdrPktmon session failed to start; Cause Windows to lock up
Some Windows users report that their computer hangs randomly and they need to Hard reset to get it back on track. When they did a little probing in the Responsible for the event, they saw “SenseNdrPktmon session failed to start“message with error code 0xC0000035. In this article, we are going to see some ways to fix this error.
What is SenseNdrPktmon?
The error message SenseNdrPktmon failed to start with the following error 0xC0000035 is seen when people open the event log on their Windows computer after experiencing issues like computer freezing or stuttering. SenseNdrPktmon is the name of the data / session. There are a lot of reasons that can cause the error and we will talk about them below.
What does the failure to start Session SenseNdrPktmon mean?
This is a network related error that appears in the event logs. It could be a corrupted WiFi driver or adapter, or a problem with the NAT address. Outdated printer drivers can also cause this error.
Fixed SenseNdrPktmon startup error from SenseNdrPktmon session
Updating printer drivers as well as drivers related to network devices can help. Remove all network drives, change their NAT address, and see if that helps. There are reports that the problems were caused by the NAT address: 0.0.0.0 or 255.255.255.255 (default). If that doesn’t help, read on!
Start by updating your computer to the latest version of Windows. Sometimes updating alone can fix the problem. But even if it isn’t, there is nothing wrong with keeping your computer up to date.
These are the things you can do to fix the SenseNdrPktmon Session startup error.
- Use Ethernet instead of WiFi or vice versa
- Run the Network Adapter Troubleshooter
- Restart IPv4 and IPv6
- Perform network reset
- Repair Windows System Image
Let’s talk about it in detail.
1]Use Ethernet instead of WiFi or vice versa
The first thing you should do, if you can, is change the way you use the Internet. If you are using WiFi, use Ethernet. Whereas, if your system is connected with an Ethernet cable, connect it to WiFi. Do this, and check if the problem is resolved.
2]Run the network adapter troubleshooter
The problem may be network related. Therefore, running the Network Adapter Troubleshooter may resolve the issue. Since we don’t know exactly what is causing the error, we need to do some network troubleshooting and see if the issue is resolved.
First, run the Network Adapter Troubleshooter. You can follow the given steps to do the same.
- Open Settings through Win + me.
- Go to Update & Security> Troubleshooting and click Additional troubleshooting tool.
- Click on Network adapter> Run the troubleshooter.
Let the process complete and the problem will be resolved.
Read: How to use the PktMon.exe network sniffer tool on Windows.
3]Restart IPv4 and IPv6
Next we will restart both the internet protocol version and see if that fixes the problem for you.
To do this, follow these steps
- Open Control Panel and click Network and Sharing Center> Change adapter settings.
- Now right click on the connected network and select Properties.
- Uncheck both Internet Protocol version 4 and Internet Protocol version 6.
- Restart your computer and re-enable these services.
Hope you are the problem will be solved.
4]Perform network reset
Then try to run the network reset and see if that fixes the problem. To do this, open Settings, go to Network & Internet> Network reset, and click Reset now. Wait for the process to complete and check if the problem is resolved.
5]Repair the Windows system image
Finally, as mentioned earlier, the problem might be due to the corrupted system image. Therefore, we have a command for you which can help you solve the error. So, run DISM to fix the Windows system image and see if the problem persists.
Read more : What is a kernel in an operating system? What are the types of kernel?